Spectrometers - LIBS - Sensors - LEDS - Accessories
Spectroscopy for a changing planet...
Call today! 727.230.1697 info@spectrecology.com
Infrared Spectrometer pyroelectric SIR12000 8.0 - 12.0 um
Low Cost, High Resolution NIR spectrometer
The SIR-12000 Scanning spectrometer collects spectral data from 8.0 µm to 12 µm wavelength range. The spectrometer's fiber based system utilizes a unique design which allows for rapid spectral scans over its entire range, or it can provide real time data from one or several discrete wavelengths. The compact design allows the SIR Analyzers to be easily integrated into OEM and online process applications. The SIR-12000 offers many innovative features, which make this a very high value in infrared instrumentation. The SIR Analyzer uses a single point detector and a high angular resolution tunable grating system. The zero backlash mechanical design provides superior accuracy and repeatability. This combination along with an innovative 24 bit Analog to Digital Converter provides high spectral resolution and very high signal to noise data. An optional integrated filter wheel provides optical order sorting of diffracted orders. The SIR Analyzers are designed with a rugged aluminum housing which is robust enough to withstand the rigors of chemical processing applications. On board data processing can be accomplished with a powerful microprocessor. Synchronization with external components and light sources is accomplished through a 14 pin digital interface.
The USB 2.0 compliant interface provides fast data transfers between the spectrometer and the host PC. Our included “SIRControl” software package is used to control all of the spectrometer functions, display and analyze data. The SIR Analyzers support a variety of triggering interfaces including an external synchronization, and a light source trigger output, both modes have an independently adjustable phase delay adjustment.
Accessories
Cool Red IR light source
50W SiN emitter, 1500K
The “Cool Red” borrows its name from stars that emit light mostly in the infrared part of the spectrum. It’s designed to fill the need of light sources for infrared fiber based spectroscopy. The Cool Red accomplishes this by a unique optical and thermal design that couples light energy from a silicon Nitride emitter glowing at 1500 °Kelvin. The Cool Red source works great as a compliment to Sandhouse Design's SIR line of midinfrared analyzers, or in any general application where high intensity infrared light is needed. This light source offers many unique features and an ergonomic design. For systems that require optical modulation, an integrated optical shutter can be modulated at frequencies of up to 200hz. The shutter can be driven externally through a 15 pin digital interface. If no external drive is available, the shutter can be driven internally by an integrated adjustable square wave generator. The frequency can be continually adjusted through the control knob on the front panel from .5hz to 200hz.. The digital output for this signal can be taken from the same 15 pin interface and used to synchronize other devices.
filament
Silicon Nitride (Si3N4)
temperature
1500 K
lifetime
2000 hours
warmup
12 seconds
power req
5 amps, 24 volts
power supply included
size
5" x 5" x 4.5"
SIR 12000 Specifications
| Range (um) | 8.0 - 12 um |
| Range (cm-1) | 833 - 1,250 |
| Resolution with following slits | |
| 10 um | 0.7nm |
| 50 um | 3.3 nm |
| 100 um | 6.6 nm |
| 200 um | 15 nm |
| 500 um | 33 nm |
| 1000 um (no slit installed) | 66 nm |
| Scan Time (seconds per scan) | 2 |
| Scan Steps | 18,000 |
| Accuracy | +/- 1/2 step |
| Diffraction Grating groove density | 100 mm-1 |
| Diffraction Grating blaze | 9.0 um |
| Optical Bench F# | F/3 |
| Optical Benc h Design | Czerny-Turner |
| Optical Input - fiber | SMA-905 |
| Optical Input - free beam | optional lens |
| Detector | pyroelectric 2mm active area |
| Digital Resolution | 16 bits |
| Triggering | Internal & External synchronization, pulse width control, phase delay |
| Digitial Outputs | 2 channels selectable 3.3/5V out |
| Digital Inputs | 2 channels, 3.3/5V compatible |
| PC interface | USB 2.0 |
| Software | Operating software & SDK |
| Power input | 5mm, 5V 4 amps |
| Weight | 10 lbs |
| Size | 9" x 9.5" x 4" |
Spectrecology
